Medical ultraviolet sterilization robot with 180W power has the characteristics of fast sterilization, high efficiency, wide range, thoroughness, and no secondary pollution. Robot disinfection is used to replace labor in special periods to reduce the risk of cross-infection of personnel. The round chassis has stronger passability and is suitable for complex environments.

Product parameters-1

Product features

● Regular disinfection at fixed points and perform set tasks

● 254nm short-wave ultraviolet lamp, efficient sterilization

● Automatically recharge without passive push

Lamp Lifetime

6 Philips lamps, each 30W/pcs, can be used for 8000+ hours, and completely sterilized within a radius of 6 meters.

Automated disinfection

According to the actual environment, set a custom target point, turn on the ultraviolet light during the period, or turn it on after arriving at the location.

Smart obstacle avoidance

Lidar 270° scanning angle, sensitive detection, avoiding objects automatically bypass, continuous and stable operation

Automatic return charging

When the UV lamp is turned on, it is forbidden to look directly at the light. If you want to operate it, you must do a good job of protection. People and animals should be kept away from the UV irradiation area.

Precautions

In order not to affect the sterilization effect, the working environment of the robot should not be too high or too low. The best temperature range is between -15°C-45°C and the relative humidity is lower than 80%, otherwise the UV sterilization time will be extended.

Precautions-1

The intensity of the UV lamp gradually decreases with time during use, so the UV radiation flux should be measured regularly. The life of the lamp is about 8000 hours, and it is recommended to replace it in time.

Precautions-2